Pine Tar on the Bat September 29 2016, 0 Comments
How to Apply Pine Tar to Your Bat
The old adage a little goes a long way has never been truer than it is with pine tar. Regardless of whether you use the pine tar stick or liquid and a rag, you're only going to need a very small amount.
Applying pine tar to your bat is rather simple. You will only need:
Pine tar stick (or container of liquid pine tar)
Application rag (if using liquid pine tar)
You can find many of these items in our Bat Accessories section of our online store. Or, you can create a pine tar rag yourself at home without having to pay a premium price. Follow these steps to create your own rag:
1. Use a flat and clean cloth rag and cut into a 9x9 inch square. Avoid terry-cloth towels.
2. Cut the duct tape into 11 inch strips. Cover one side completely, keeping 1 inch on either side to overhang on the front of the rag. This will allow you to apply pine tar to your bat and not get any on your hands.
Now that you have your rag, you'll want to properly apply the pine tar to your bat. Follow these steps to ensure you are doing this correctly:
1. Take your rag or pine tar stick and apply to the area of the bat on your handle that you want. Make sure you check with your league to see how far up you can apply the tar.
2. The handle will be sticky, so use a rosin bag to make it more "grippy."